Diedrich Technologies' 200 Lime-Solv is a heavy-duty cleaning combination of organic and inorganic acids, wetting agents and inhibitors for use in the final clean-up of new masonry.

• Efficiently cleans residual mortar, job site soiling, staining, and efflorescence
• Will not discolor or damage masonry surfaces
• Safer and more controllable than raw muriatic acid
• Typical Coverage Rates: 150-200 SF per gallon
• Sizes: available in 1, 5, or 55 gallons

   Product Data Sheet
   Safety Data Sheet

Diedrich Technologies' 202V Vana-Stop New Masonry Cleaner is specifically formulated for cleaning new masonry susceptible to vanadium, manganese, molybdenum and other metallic stains. 202V Vana-Stop is a productive combination of organic and inorganic acids, wetting agents and inhibitors for use in the professional clean up of new masonry.

• Efficiently cleans off residual mortar, efflorescence, job site soiling and staining
• Reduces the likelihood of a staining occurrence
• Eliminates costly re-cleaning and stain removal expenses
• Does not discolor or damage surfaces
• Safer and more controllable than raw muriatic acid
• Typical Coverage Rates: 150-200 SF per gallon
• Sizes: available in 1, 5, or 55 gallons

  Product Data Sheet
  Safety Data Sheet

Diedrich Technologies' 303WB is a VOC compliant, penetrating, breathable, siloxane product for use on precast and site cast concrete, clay and concrete masonry, sandstone and stucco surfaces where surface darkening is unacceptable.

• Reduces bonding of airborne dirt and hydro-carbons
• Reduces water damage caused by freeze/thaw cycles
• Provides protection against efflorescence and exhibits excellent resistance to ultraviolet rays and chlorine ions
• Exceeds requirements of NCHRP 244, meets SSW 110C Federal Specification and ASTM E514
• Typical Coverage Rates for CMU: 60-80 SF per gallon
• Sizes: available in 1, 5, or 55 gallons

  Product Data Sheet
  Safety Data Sheet

333 Omegaseal functions as a main component of the Diedrich Anti-Graffiti System, providing hydrophobic protection to masonry surfaces through the formation of a semi-permeable membrane. The membrane protects against penetration of most materials commonly used by vandals. When a protected surface has been attacked, Diedrich 505 Paint Stripper, assisted by high pressure water will remove the offensive markings.

   Product Data Sheet
   Safety Data Sheet

Spray-Away™ No-Scrub Efflorescence Cleaner is an innovative new product for final removal of "new masonry bloom". After completing the final wash-down of new construction, Spray-Away can simply be sprayed on any leftover efflorescence and the job is done with NO SCRUBBING or rinsing required! The remaining residue will be disappear leaving a dry, scum-free wall.

• Typical Coverage Rates: 150-200 SF per gallon
• Product should not be diluted
• Sizes: available in 1 gallon spray-bottle, 5 gallon bucket, or 55 gallon drum

   Product Data Sheet
   Safety Data Sheet

505 Special Coatings Stripper is an opaque, non-flammable, water soluble, non-damaging paint remover with a viscous, heavy body designed to cling to vertical surfaces. Quick action raises the coating in 10 to 20 minutes for easy water wash-off. The product contains no caustic alkali, acid or benzol. "M-PYROL" resin solvent, a new mega-strength catalyst, is added for extra solvency on hard-to-lift complex paint resins such as epoxies, urethanes, rubber-base, elastomerics, enamels, etc. 505 is a part of the Diedrich Anti-Graffiti System.

•    Product Data Sheet
  
•    Safety Data Sheet